Clemco Wetblast Injector


WETBLAST Injector - Converts Dry Blast Machine to Wetblast

 - Economical Conversion Kit For Most 2-cuft and Larger Blast Machines

Quickly Add Powerful Wetblast Capability to a Dry Blast Machine.  The Wetblast Injector conversion kit adds dust suppressing, wetblast capability to most dry blast machines.  It is versatile, rugged, simple to operate and install, and provides performance superior to traditional slurry systems.  It mixes water and abrasive at the nozzle for maximum operator control.  It also can rinse, air dry and quickly switchback to dry blasting.  The wetblast injector has everything you need to quickly add wetblast capability to a dry blast machine,

Below are the major components of the Wetblast Injector assembly:


Water Hose 

  • 3/8" ID x 50 ft

  • Rated 1000 psi


  • 1/2" air inlet 

  • 3/4" water inlet

  • 1/2" feed to two 1/4" main water outlet connections

  • 1/4" individual water outlet

10:1 Pump

  • Air-operated, positive-displacement, self-priming pump

  • Consumes 28 CFM at 100 psi

  • Water consumption is needle-valve controlled:

    • Blasting - Typically 0.25 GPM at 60 psi.

    • Wash down - Typically maximum flow of 2.8 GPM.

    • Note: Water consumption varies depending up nozzle size, blast pressure, condition of surface, material being removed by blasting, and friability of the abrasive.