GOFF Portables

Model 385E

Small yet powerful, the Goff 385E is a complete and versatile shot blast cleaning system that is simple to operate and easy to maintain.

FEATURES:

• 8-1/2” Blast Pattern

• 3 HP Motor with 230/1/60 Voltage Operation

• Cleans Within 1/2” of Wall

• Split Assembly Chassis Design

• Replaceable Wear Liners

• Adjustable Handle Positioning

• Narrow 11” Overall Machine Width

• Magnetic Seals

Specifications: Model 385

Blast Wheel

• 6 1/2” one piece, internally fed design.

• Balanced wheel for smooth operation.

• Accessible for easy & economical replacement.

• Cast from abrasive resistant alloy for maximum wear life.

• Heavy duty bearing assembly.

• Single belt and sheave.

 

 

Control Cage

 

• Enclosed dial type.

• Allows positive adjustment of blast pattern.

• Abrasive resistant alloy for maximum wear life.

 

 

Control Cage Chassis

 

 • Manganese steel plate construction.

• Replaceable manganese liners in wear area.

• Magnetic side seals.

• Edge seal system. (optional)

      Equipment Dimensions

                                             385E

Width

       With Magnetic Seals           12”

       With Edge Seals                 10”

 

Blast Width                              8-1/2”

Height                                      36”

Length                                   44-1/2”

Weight                                   210 lbs

 

Abrasive Recycling System

• Rebound reclaim system.

• Air wash separator system.

• 40 lbs abrasive capacity.

• Manually operated, totally enclosed, fully adjustable abrasive valve.

Electrical Components

• NEMA Type 12 electrical enclosure.

• Thermal overload protection.

• 230 Volt, 1 Phase, 60 cycle 14 amps full load amperage (without dust collector).

 

 

Electric Motors

 

• Blast Wheel……….230/1/60 / 3 HP/ 3600 RPM

Blast Wheel

• 9" or 10" interchangeable segmented internally fed design.

• Balanced wheel for smooth operation.

• Accessible for easy & economical maintenance.

• Cast of abrasive resistant alloy for maximum wear life.

• Heavy duty bearing assembly.

• Dual sheave and belt drive

Unique spring-lock design blade mount

 

 

Control Cage

 

• Enclosed dial type allows positive blast pattern adjustment and control.

• Cast of Abrasive resistant alloy for maximum wear life.

 

 

Control Cage Chassis

 

• Manganese steel plate construction.

• Cast alloy replaceable lining in the Blast Housing.

• Interchangeable side seals.

• Urethane front seals.

• Heavy-duty non-marring urethane casters.

Model 15E13

The Model 15E13 is the most desired and versatile of Goff’s full line of Portable Shot Blast Cleaning Equipment. The 15E13 is a proven design offering excellent production, simple operation, and easy maintenance. The 15E13 system includes the continuous-duty, self-cleaning Model 816 DC cartridge-type, self pulse Dust Collector.

FEATURES:

• 13” Blast Pattern

• 15 HP Blast Wheel

• Blasts within 1-1/2” of walls

• Interchangeable 9" and 10" Blast Wheel 

• Fully Variable Speed Drive

• Volt Select Switch 230/460 volt/3 phase/60 cycle

• Low Noise Operation

• Narrow 16-1/2" Width

13” Blast Pattern Low Noise Operation 15 HP Blast Wheel Narrow 16-1/2” Width Blasts within 1-1/2” of walls Fully Lined Blast Housing Interchangeable 9” and 10” Blast Wheel HEPA Filter Adaptable Fully Variable Speed Drive Circuit Breaker Electrical Protection Volt Select Switch 230/460 volt/3 Fingertip Abrasive Control Valve phase/60 cycle

Specifications: Model 15E13 with 816 Dust Collector

                Equipment Dimensions

                                             151E13                   816DC       

Width                                     16-1/2"                      27"

Blast Width                                 13”                        N/A

Height                                        43”                        63"

Length                                       50”                         60"

Weight                                    880 lbs                    1140 lbs

Abrasive Recycling System

• Rebound reclaim system.

• Air wash separator system.

• 75 lbs Abrasive capacity.

• Manually operated, totally enclosed, fully adjustable, fingertip controlled abrasive valve.

816DC Remote Dust Collector

• Functions independently of blast head.

• Low Profile Design.

• Eight (8) cartridge elements for high efficiency particulate removal.

• Self-pulse cleaning of cartridge elements.

• 50’ of duct hose and power cable to connect Dust Collector and Blast Unit.

• 100’ of power supply cable included.

• Refuse capacity—3.5 cu. ft.

• Swivel urethane casters on Refuse Pan.

• Blower exhaust silenced with lined muffler chamber.

• Air nozzle and hose mounted for convenient blow off.

 

 

Electrical Components

• Nema type 12 electrical enclosure

• Circuit Breaker overload protection.

• 230/460 volt/3 phase/60 cycle.

Electric Motors

• Blast Wheel - 15 HP/3600 RPM

• Drive System - (2) 1/4 HP/Variable Speed

• Dust Collector Blower - 3 HP/3600 RPM

• Compressor - 3/4 HP/1800 RPM

• Full load operating amps - 230V/3Ph/60Hz/55A

• Full load operating amps - 460V/3Ph/60Hz/28A

Blast Wheel

Wheel - The direct drive blast wheel revolves at 3600 RPM for maximum abrasive velocity. 15” diameter wheel with 7 curved blades 3” wide is standard. All wheel components assure smooth operation.

Wheel Housing - Fabricated from 1/4” steel plate. Housing is lined with cast interlocking abrasive resistant liners.

 

Blades - Unique interlock design eases blade replacement. Cast from abrasive resistant alloy to insure maximum life. Curved blade design provides maximum abrasive control.

Control Cage - Dial type cage gives positive adjustment of blast pattern. Cast alloy steel construction.

Blast Unit Construction

Cabinet - Rebound chamber constructed of manganese steel. Positive seals prevent escape of abrasive and dust. Self propelled variable speed hydraulic drive allows complete operator control. Caster type wheels for mobility.

Abrasive Recycling System

• Rebound reclaim system.

• Air wash separator system.

• 100 lbs abrasive capacity.

• Abrasive control valve, fully adjustable butterfly valve provides precise flow control of abrasive to each blast wheel. Totally enclosed design assures maximum noise suppression.

Model 420E

Goff’s 420E Portable Blast Cleaning system delivers efficient and economical cleaning and surface preparation with a proven design offering excellent production, simple operation, and easy maintenance.

FEATURES:

• Air Wash Separator

20” Blast Width

High Efficiency Cartridge DC

Self Propelled

Rebound Abrasive Reclaim

Direct Drive Blast Unit

Low Noise Level

Variable Speed Drive

Specifications: Model 420E

                Equipment Dimensions

                                             420 

Width                                      38"

Blast Width                              20”  

Height                                     72"

Length                                     96"

Weight                                   4000 lbs

Ventilation

The dust collector Model 1216 is standard. This mounted dust collector offers 1200 CFM of airflow. This unit consists of 12 high efficiency cartridge type elements. To maintain continuous duty the system has automatic reverse air flow pulse self cleaning of the cartridges. The pulse system requires 90 PSI of compressed air (not included). The one step slide out dust bin allows easy disposal of dust and debris.

Electrical Components

 • NEMA Type 12 electrical enclosure.

 • Thermal overload protection.

 • 460 volt primary, 115 volt secondary control transformer, all 3 phase, 60 cycle.

 

Electrical Motors

 

 • All motors TEFC, ball bearings, 230/460 volt, 3 phase

 • Blast Wheel - 40 HP/3600 RPM

 • Hydraulic Motor - 3 HP/1800 RPM

 • Dust Collector 3 HP/1800 RPM

 • Full Load Amps w/1216 DC, 460V/3Ph/60Hz/62A

 

NOISE LEVEL - Approx. 95 db.

Blast Wheel

• 6 1/2” one piece, internally fed design.

• Balanced wheel for smooth operation.

• Accessible for easy & economical replacement.

• Cast from abrasive resistant alloy for maximum wear life.

Control Cage

• Enclosed dial type.

• Allows positive adjustment of blast pattern.

• Abrasive resistant alloy maximum wear life.

 

 

Chassis

 

• Manganese steel plate construction

• Magnetic side seals.

• Edge seal system. (optional)

Model E8

Small yet powerful, the Goff E8 is a complete and versatile shot blast cleaning system that is simple to operate and easy to maintain.

FEATURES:

• 110 Volt

• 8-1/2” Blast Pattern

• 3 Peak HP Motor

• Cleans Within 1/2” of Wall

• Split Assembly Chassis Design

• Narrow 11” Overall Machine Width

• Magnetic Seals

• Ideal for sidewalks, patios, garages, and swimming pool areas

Specifications: Model E8

                 Equipment Dimensions

                                               E8 

Width

With Magnetic Seals                10-1/2"

With Edge Seals                      9-1/2"

Blast Width                             8-1/2"  

Height                                     36"

Length                                     46"

Weight                                   110 lbs

Abrasive Recycling System

• Rebound reclaim system.

• Air wash separator system.

• Abrasive capacity 20 lbs.

• Manually operated, totally enclosed, fully adjustable abrasive valve.

 

Electrical Components

• 110 Volt, 1 Phase, 60 cycle 14 amps full load amperage.

Electric Motors

• Blast Wheel……….110/1/60 / 2500 W

Roadabrator 26D13

Applications Concrete floor coating removal and preparation Roadway paint stripe and marking removal Bridge and parking structures

FEATURES:

• Totally Self-Contained

• Hydraulic Blast Head Lift

• 13” Blast Wheel Width

 Cruise Control

• Hydrostatic Speed Drive

• Low Noise Level 

Rebound Abrasive Reclaim

• Direct Drive Blast Unit

• 26 HP Diesel Power

• John Deere Powered

Goff Centrifugal Blast Wheel

Blast Wheel

• Direct driven from mid PTO through two spiral gear boxes. Blast wheel assembly consists of precision balanced components which are easily and economically replaceable. Blast wheel is Goff’s standard 9” assembly.

Blades

• Unique snap-lock design eases blade replacement. Cast from abrasive resistant alloy to insure maximum life. Curved blade design provides maximum abrasive control. 

 

Control Cage

• Dial type enclosed cage gives positive adjustment of blast pattern. Cast alloy steel construction.

Wheel Housing

• Fabricated from Manganese steel plate. Housing is lined with Manganese steel. All liners are replaceable.

Blast Unit Construction

Chamber

• Rebound chamber constructed of Manganese steel. Positive seals prevent escape of abrasive and dust. Hydraulic lift and caster type wheels allow operator complete control for easy mobility.

Abrasive Recycling System

Reclaim

• Rebound reclaim system.

Separator System

• Air Wash.

Abrasive Required

• Approximately 100 pounds.

Abrasive Control Valve

• Totally enclosed butterfly valve is electrically operated. Valve is fully adjustable for positive flow control.

Specifications: Roadabrator 26D13 with 816DC

                   Equipment Dimensions

                                               E8 

Width                                       74" 

Height                                      80"

Length                                    144"

Cleaning Width                          13"

Shipping Weight                      4000 lbs

Ventilation

Dust Collector

• 850 C.F.M. Model 816 dust collector includes eight, 8” dia. x 16” long cartridge filters for maximum cleaning efficiency and is self cleaning by reverse pulse compressed air.

 

Compressor

• 2 Cylinder, 2 HP, single stage compressor delivers 5.74 C.F.M. at 100 P.S.I. Collector and compressor are powered by the rear PTO of tractor and operated by PTO switch located on dash board.

 

 

ELECTRICS

• 12 Volt solid state timer board installed in moisture-proof electrical enclosure operates dust collector pulse system

DRIVE UNIT 

• 26 HP Diesel tractor with dual (mid and rear) PTO’s. Tractor engine operates the tractor, blast wheel, and dust collector.

 

 

SAFETY FEATURES

• Hopper lid has safety switch located on blast head, which will shut off blast wheel if lid is opened during blast cycle. Hydraulic lift for blast head has pressure switch located on cylinder so abrasive valve closes if head is lifted during blast cycle.

Tractor Specifications

Mainframe Construction:

The mainframe is semi tubular, one-piece chassis with integral fenders.

Engine:

The power plant is a six cylinder CAT diesel which delivers 175 HP at 2250 RPM to provide smooth operation.

Drive Train:

Variable Speed Hydrostat Drive with 2 stage transmission.

Hydraulic & Pneumatic:

The hydraulic system is composed of a 45 gallon reservoir, suction strainers, shut-off valves, return filter, and a 39,800 BTU hour oil cooler. The pneumatic system consists of a direct driven 12.1 CFM air compressor.

FEATURES:

Caterpillar diesel power, adjustable seat, tilt steering wheel, Murphy Link tm Controller Area Network (CAN) system, removable ignition/Powerview display monitor, control panel protective locking cover, working lights, head and tail lights, LED safety and warning lights, double rotary beacon, operator safety kill switch, automatic pulse unit, pneumatic hood lift, pneumatic blow off hose, with optional vacuum port dust removal, dust collector exhaust silencer and 40 gallon fuel tank, foam filled tires.

Roadabrator I75D30

Applications Concrete floor coating removal and preparation Roadway paint stripe and marking removal Bridge and parking structures

FEATURES:

• 175 HP CATERPILLAR DIESEL

• TILT STEERING WHEEL

• LOCKING CONTROL PANEL COVER

 30” BLAST PATTERN

• VARIABLE SPEED HYDROSTAT DRIVE

• EASY MAINTENANCE

UNMATCHED PERFORMANCE

• 10 CU. FT. DUST CAPACITY

• REMOVABLE IGNITION/POWERVIEW DISPLAY MONITOR

• CONTROLLER AREA NETWORK (CAN) SYSTEM

 

Specifications: Roadabrator I75D30

                   Equipment Dimensions

                                               E8 

Width                                   8'-4-1/4" 

Height                                   8' - 7"

Length                                 11' - 10"

Weight                                11,000 lbs

Blast Width                               30"

Blast Wheel Specifications

WHEEL:

The hydraulic driven blast wheel revolves at 3600 RPM for maximum abrasive velocity. 15” diameter wheel with eight 3” wide curved blades.

BLADES:

Unique interlock design eases blade replacement. Cast from abrasive-resistant alloy to insure maximum life. Curved blade design provides maximum abrasive control.

CONTROL CAGE:

Dial type cage gives positive adjustment of the blast pattern. Cast alloy steel construction.

 

Blast Unit Construction

CABINET:

The rebound chamber is constructed of manganese steel. Positive seals prevent escape of abrasive and dust.

Abrasive Recycling System

CAPACITY: 10 cu. ft. dust capacity with environmentally placed evacuation ports.

 

RECLAIM: Rebound reclaim system.

 

SEPARATOR SYSTEM: Air wash/scalping drum

 

VENTILATION: 2600 CFM collector.

ABRASIVE REQUIRED: 250 lbs.

ABRASIVE CONTROL: Fully adjustable butterfly valve provides precise flow control of abrasive. Totally enclosed design for maximum noise suppression.

Z Abrasives

Avail 7 days a week

Same day shipping

Call us
714-330-3177

© 2015 Copywrite

follow us

  • Facebook Metallic
  • Twitter Metallic
  • Pinterest Metallic
  • Google Metallic