GOFF Wire Mesh

Design and Sequence of Operations

GOFF WIRE MESH 

 

Goff’s Wire Mesh Belt continuous production shot blast cleaning machines are designed to offer high production cleaning of various parts and castings. The Wire Mesh Design is simple and requires less material handling.

Parts placed on the wire mesh belt conveyor continuously pass through the abrasive tight entry vestibule into the blast chamber. The quantity and placement of the blast wheels coupled with the blast wheel horsepower determine the cleaning capacity and production capabilities of the machine.

 

The parts are blast cleaned passing through the blast chamber and then exit through the series of seals in the egress vestibule.

Goff’s Wire Mesh Blast Cleaning Machine:

Continuous blast cleaning with minimal parts handling.

Features of the Wire Mesh

Goff, Inc. Page 3

 

Pitless design

• Wear resistant cabinet

• Manganese wire mesh conveyor belt in various widths, from 18”- 60”

• Variable speed conveyor belt

• Quantity of blast wheels from 2 to 12

• Direct drive blast wheels

• Range of Blast Wheel horsepower from 7½ up to 50 hp each.

• Large diameter drive rollers for less belt fatigue

• Single or dual air wash separators

• Slider bed belt supports

• Automatic (pneumatic) belt tensioner

• Standard and custom designs

• Standard voltage 460 volt, 3 phase, 60 cycle

• All Goff equipment includes 1 year limited warranty

Available Options

 230 volt, 3 phase, 60 cycle electrics

 Heavy duty manganese belt conveyor

• Automatic abrasive adder

• Spill hopper with abrasive returns

• Replaceable cast cabinet lining

• Rotary scalping drum

• Abrasive blow off

• Work sensors

• Magnetic separators

• Cartridge dust collectors

• Programmable logic controllers

• Panel view operator interface

• Variable speed blast wheel controllers

• Abrasive sizing screens

• Sorting tables and conveyors

• Robotic load or unloads

Efficiency and Precision: Goff Blast Wheels

 

The Blast Wheel

 

The Blast Wheel assembly is the heart of every Goff machine. The automatically controlled abrasive valve allows the optimum flow of abrasive to the impeller in the center of the blast wheel. The impeller distributes the abrasive through the control cage. The correct adjustment of the control cage assures that the abrasive flow is received by the blades at the proper time to target the blast pattern at the parts or castings to be cleaned. The blades then throw the abrasive at the parts to be blast cleaned. The Goff Blast Wheel is a proven design that allows and offers easy maintenance.

Efficiency and Precision: Goff Blast Wheels

Unique Snap-Lock Blade System 

Allows easy and quick blade change 

The adjustable control cage assures accurate blast pattern control

Technical Data

Model                       W.M. 18                  W.M. 24-4                  W.M. 27 1/2-4                  W.M. 36-8                  W.M. 48-8

Belt Width                     18”                           24”                             27 1/2”                               36”                             48”

Work Envelope           18” x 10”                24”W x 13”H                27 1/2”W x 13”H               36”W x 13”H                48”W x 13”H

 

Blast Wheels HP         5 - 15 HP                 7½ - 30 HP                    10 - 30 HP                       10 - 30 HP                  10 - 30 HP 

(1)

                                                              (12”, 13 1/2”,                 (12”, 13 1/2”,                  (12”, 13 1/2”,               (12”, 13 1/2”,                                                                 or 15” Dia.)                    or 15” Dia.)                     or 15” Dia.)                 or 15” Dia.)

 

 

Dimensions (2)

 

    Height (B)              18’ - 21’                   20’ - 26’                         20’ - 26’                          20’ - 26’                      24’ - 28’

 

    Width (A)               16’ - 22’                   20’ - 24’                         20’ - 24’                          20’ - 24’                      22’ ‘- 26’

 

    Depth (C)               10’ - 15’                   12’ - 16’                         12’ – 16’                         13’ - 20’                      14’ - 20’

 

    Conveyor Work         4’ - 5’                     4’ - 5’6”                          4’ - 5’6”                          4’ - 5’6”                       4 - 5’6”

 

    Belt Speeds             3 - 20                     3-20 fpm                        3-20 fpm                         3-20 fpm                    3-20 fpm 

    Height  (D)

 

  Notes: Range (fpm)

1. Blast wheel horse power and diameter will vary due to parts configuration, blast wheel placement and production requirements.

2. Dimensions will vary due to abrasive separation required.

3. Separator may be single or dual air wash.

4. Dust Collectors required will vary due to the air wash separator and the blast wheel quantity and horsepower.

 

The above specifications are for reference purposes only and are subject to change without notice.

 

Specific dimensions on the General Arrangement Drawings are confirmed

GOFF Micro Mesh

                              Features of the Micro Mesh Continuous Shot Blast

• Pitless design                                                                 • Four 5 HP Blast Wheels     

• Wear resistant cabinet                                                    • Direct drive blast wheels

• 12" Manganese wire mesh conveyor belt                          • C-Faced Motors

• Variable speed conveyor belt                                           • Large diameter rollers

• Single or dual air wash separators                                   • Slider bed belt supports

• Automatic (pneumatic) belt tensioner                              • Standard and custom designs

• Standard Voltage 230/460/3/60                                      • 1 year limited warranty

Abrasive Blast Equipment

GOFF WIRE MESH

 

Goff offers a complete line of stationary, airless centrifugal blast cleaning machinery that clean items at a fraction of the cost of conventional air-blast cleaning methods. Goff’s direct drive blast wheels offer consistent production and superior performance. The abrasive media is cleaned and recycled, reducing disposal and minimizing abrasive costs. Several product groups are available, as well as specially engineered products to meet individual requirements. Whatever the product, Goff’s stationary abrasive blast cleaning equipment provides the performance you can count on. 

Available Options

 

• 230 volt, 3 phase, 60 cycle electrics

• Heavy duty manganese belt conveyor

• Automatic abrasive adder

• Spill hopper with abrasive returns

• Replaceable cast cabinet lining

• Rotary scalping drum

• Abrasive blow off

• Work sensors

• Magnetic separators

• Cartridge dust collectors

• Programmable logic controllers

• Panel view operator interface

• Variable speed blast wheel controllers

• Abrasive sizing screens

• Sorting tables and conveyors

• Robotic load or unloads

            Model                                                                 MM 12-4

 

         Belt Width                                                                  12 “

      Work Envelope                                                       12” W x 10” T

   9” Blast Wheels HP (4)                                                     5 HP

       Dimensions                                                         

          Height                                                                  14’ -1/4”

          Width                                                                       13’

 

          Depth                                                                       5’7”

 

 Conveyor Work Height                                                    42-3/4”

 

Belt Speeds Range (fpm)                                                  3 - 20

Design and Sequence of Operations

Goff’s Wire Mesh Belt continuous production shot blast cleaning machines are designed to offer high production cleaning of various parts and castings. The Wire Mesh Design is simple and requires less material handling. Parts placed on the wire mesh belt conveyor continuously pass through the abrasive tight entry vestibule into the blast chamber. The quantity and placement of the blast wheels coupled with the blast wheel horsepower determine the cleaning capacity and production capabilities of the machine. The parts are blast cleaned passing through the blast chamber and then exit through the series of seals in the egress vestibule.

The Blast Wheel

The Blast Wheel assembly is the heart of every Goff machine. The automatically controlled abrasive valve allows the optimum flow of abrasive to the impeller in the center of the blast wheel. The impeller distributes the abrasive through the control cage. The correct adjustment of the control cage assures that the abrasive flow is received by the blades at the proper time to target the blast pattern at the parts or castings to be cleaned. The blades then throw the abrasive at the parts to be blast cleaned. The Goff Blast Wheel is a proven design that allows and offers easy maintenance.

Z Abrasives

Avail 7 days a week

Same day shipping

Call us
714-330-3177

© 2015 Copywrite

follow us

  • Facebook Metallic
  • Twitter Metallic
  • Pinterest Metallic
  • Google Metallic